700 Bar Hydraulic Cylinders
Single-acting and double-acting cylinders, including low-profile, double-acting center-hole and lock-nut hydraulic cylinders for lifting, pressing and positioning work.
5 – 200 ton · 700 bar · strokes from 6 mm to 300 mmTECPOS Hydraulic Equipment
TECPOS Hydraulic Equipment & Tools in the UAE
Hydraulic jacks, pumps, cylinders, presses, pullers, flange tools and specialist hydraulic equipment for marine, shipyard and industrial applications across the UAE and GCC.
Fast response to your enquiry
— no obligation, clear next steps.
Korean hydraulic equipment
700 bar & ultra-high-pressure systems
Marine & industrial applications
Why TECPOS
TECPOS provides high-pressure hydraulic equipment for lifting, pulling, pressing and positioning across marine, shipyard and industrial environments.
700 Bar Hydraulic Capability
A broad range of 700 bar hydraulic equipment, with ultra-high-pressure pumps available up to 2,500 bar for demanding industrial applications.
Broad Equipment Range
Cylinders, pumps, jacks, pullers, presses, crimping and pipe tools, valves, manifolds and custom solutions — the complete hydraulic toolkit.
Manufacturer Warranty
TECPOS products carry a 1-year manufacturer warranty. HeroTech Marine coordinates all warranty enquiries and support on your behalf.
Application-Specific Selection
We help match the right capacity, stroke, pressure rating and accessories to your specific application — so the equipment fits the job.
TECPOS Hydraulic Equipment Range
TECPOS hydraulic equipment supplied across the UAE and GCC for marine, shipyard, offshore and industrial applications.
700 Bar Hydraulic Pumps & System Components
Hand, foot and air-driven pumps, electric and high-pressure pumps rated to 700 bar, plus battery units, hoses and couplers for cylinders, presses and hydraulic tools.
700 bar standard · up to 2,500 bar ultra-high-pressure
Hydraulic Jacks & Heavy Lifting Equipment
L-jacks, propeller fitting hydraulic jacks, disk ram jacks and welding jacks — for confined lifting, propeller mounting and heavy-lift positioning in shipyards and industrial sites.
50 – 1,500 ton · high-pressure hydraulic lifting
Hydraulic Bolt Tensioners & Flange Tools
Hydraulic bolt tensioners and hydraulic flange spreaders, plus nut splitters for controlled bolt loading, flange separation and safe removal of seized nuts without bolt damage.
M20–M100 · 19–580 ton · 1,500 bar
Hydraulic Pullers & Presses
Hydraulic pullers for removing bearings, gears, couplings and pulleys from shafts, plus hydraulic shop presses for pressing, bending and assembly work.
Pullers 10 – 50 ton · presses 20 – 200 ton · 700 bar
Hydraulic Punching, Cutting & Pipe Tools
Hydraulic punches, angle cutters, rod and wire cutters, pipe benders and stainless pipe joint tools for fabrication, structural steel, and industrial piping work.
700 bar · hydraulic punching, cutting & pipe-working toolsNeed a specific model, capacity or configuration?
Tell us the application, required capacity, stroke or pressure rating and we'll confirm the right TECPOS model, availability and pricing.
Request a QuoteFeatured TECPOS Hydraulic Tools & Equipment
Selected TECPOS products for specific marine, oil & gas and industrial applications.
Cylinders
700 Bar Hydraulic Cylinders
5–200 ton range across single-acting, double-acting, low-profile, center-hole and lock-nut designs.
Marine
Propeller Fitting Jacks
Specialist equipment for marine propeller mounting and demounting, with 50–200 ton capacity at 700–2,000 bar.
Flange Tools
Hydraulic Flange Spreaders
700 bar flange spreading tools for maintenance and flange separation — 1–14 ton output with up to 94 mm spread.
Nut Removal
Hydraulic Nut Splitters
Tools for removing seized or corroded nuts without damaging the bolt — M12 to M33 bolt ranges at 700 bar.
Bolting
Hydraulic Bolt Tensioners
M20–M100 hydraulic tensioners for controlled bolting applications — 19–580 ton at 1,500 bar, for critical flange and structural joints.
Power
Ultra-High-Pressure Pumps
Electric hydraulic pumps reaching 2,500 bar for demanding industrial applications, including high-pressure testing and heavy-duty tools.
TECPOS Hydraulic Equipment Applications
Representative applications include marine, shipyard, lifting, positioning and industrial maintenance work.
Heavy Lifting
High-capacity cylinders for controlled lifting and load holding.
Shipbuilding
Hydraulic tooling for block handling, alignment and fabrication.
Railway Maintenance
Lifting and positioning equipment for rolling stock and track work.
Vessel Positioning
Hydraulic support and alignment during build, docking and repair.
TECPOS Hydraulic Equipment for Marine Applications
Hydraulic equipment sourced for shipbuilding, vessel repair and marine maintenance across the UAE, Saudi Arabia, Qatar, Kuwait, Oman, Bahrain and the wider GCC.
Shipbuilding
Hydraulic cylinders and jacks for block handling, alignment and heavy fabrication work in shipyards.
Vessel Repair
Pullers, presses, cutting tools and nut splitters for mechanical work during dry-docking and repairs.
Propeller Fitting
Propeller fitting hydraulic jacks and disk ram jacks for mounting and demounting propellers on shafts.
Heavy Lifting
High-capacity 700 bar cylinders for controlled lifting and load-holding in shipyard and dry-dock operations.
Vessel Positioning
Hydraulic support and alignment equipment for hull positioning during build, docking and repair.
Marine Maintenance
Bolt tensioners, flange spreaders and pipe tools for onboard piping and flange maintenance work.
Why Source Through HeroTech Marine
HeroTech Marine sources TECPOS hydraulic equipment for UAE and GCC requirements — one contact for selection, quotation and delivery coordination.
Requirement Verification
We review your specification, application and delivery requirements before anything is quoted.
Technical Supplier Coordination
We coordinate model selection, technical questions and specification checks with the manufacturer on your behalf.
Commercial Procurement
We coordinate quotation, commercial terms and order processing through one customer-facing procurement contact.
Marine-Focused Support
Built around the demands of shipowners, shipyards, offshore operators and industrial maintenance teams.
Delivery Coordination
We coordinate shipping, documentation and delivery to your port, yard or site in the UAE and wider GCC.
One Procurement Contact
You deal with HeroTech Marine. We handle the manufacturer-side coordination and follow-up.
How to Request a Quote
From requirement to delivery coordination — managed by HeroTech Marine, a hydraulic equipment supplier for the UAE and GCC.
1
Share Your Requirement
Send the product or model, quantity, specifications and the application it's for.
2
Review & Verification
We review the requirement, verify specifications and confirm what's needed.
3
Confirmation & Quotation
We confirm equipment, availability, pricing and lead time before providing the quotation.
4
Delivery Coordination
We coordinate order confirmation, documentation and delivery.
TECPOS Hydraulic Equipment — FAQ
Common questions about sourcing TECPOS hydraulic equipment through HeroTech Marine.
Which regions do you supply TECPOS hydraulic equipment to?
HeroTech Marine sources TECPOS hydraulic equipment and tools for customers across the UAE, Saudi Arabia, Qatar, Kuwait, Oman, Bahrain and the wider GCC, covering marine, shipyard and industrial applications.
What does the TECPOS 700 bar range cover?
The TECPOS 700 bar range includes hydraulic cylinders, hand and electric hydraulic pumps, jacks and heavy lifting equipment, bolt tensioners, flange tools, pullers, presses and hydraulic punching, cutting and pipe tools.
Do you supply hydraulic bolt tensioners and flange tools?
Yes — hydraulic bolt tensioners, hydraulic flange spreaders and nut splitters are available for controlled bolt loading, flange separation and safe removal of seized nuts without damaging the bolt.
Can TECPOS equipment be used for marine and offshore applications?
Yes. TECPOS hydraulic equipment is used in shipbuilding, vessel repair, propeller fitting, heavy lifting, vessel positioning and marine maintenance applications across the GCC.
How do I request a quotation for TECPOS hydraulic equipment?
Send the model or product category, capacity, stroke or pressure rating, quantity and the application it is for. We review the requirement, confirm specifications and availability, and return a quotation with lead time. HeroTech Marine coordinates all equipment supply, whether for a single hydraulic tool or a full project package.
Need a TECPOS quotation?
Send us the model, capacity, stroke or application — we'll confirm availability and pricing.
Fast response to your enquiry — no obligation, clear next steps.
Request a TECPOS Quote
Tell us what you need and we'll come back with availability, pricing and lead time.